Guide · Location managers · 3 min read · Updated 17 November 2026
Planning a Unit Base and Location Parking for a Shoot
Short answer
Plan a unit base by finding a flat, accessible site close to the location with room for trucks to turn, then agree its use with the landowner or the council. Vehicles parked on public roads usually need parking suspensions through the council or its filming office, often with several working days' notice. Map truck routes in advance and schedule arrivals before residents need the road.
What a unit base is
The unit base is the hub where a production parks its support vehicles: costume and make-up trucks, honeywagons, catering, generators, artist trailers and the equipment trucks. It sits as close to the shooting location as possible, ideally within walking distance, so crew and cast can move quickly between base and set.
On smaller shoots the unit base may be a few vans in a car park. On drama productions it can fill a field or a large car park with dozens of vehicles. Either way, planning it properly saves time on every shooting day.
Choosing the site
Look for hard standing that can take heavy vehicles, enough space for them to turn without reversing into traffic, and a straight route in from a main road. Low bridges, weight limits and narrow lanes can rule a site out even if it looks perfect on a map. Access for catering deliveries and generator refuelling matters too.
Common unit base sites include council car parks, school and leisure centre car parks out of hours, farmyards, industrial estates and private land. Each needs permission and often a fee.
- Hard, level ground that takes trucks and generators
- Turning space for the largest vehicle
- A clear route from a main road with no low bridges
- Walking distance to set where possible
- Neighbours who will be least affected by noise and lights
Permissions and parking suspensions
Filming on public roads and parking unit vehicles there usually needs permission from the local council or its filming office. Many councils have a dedicated film office that handles applications, parking suspensions and liaison with residents and the police. Notice periods vary by area and by the scale of the shoot, so apply early.
Parking suspensions reserve kerb space for production vehicles on specific days. They are arranged through the council, which puts up signs in advance. Private land, such as a supermarket car park or a farm, needs the owner's written agreement instead.
| Location type | Who to ask | Typical notice |
|---|---|---|
| Public road or kerbside | Council or its filming office | Several working days or more |
| Council car park | Council filming office or parking team | Varies by council |
| Private car park or yard | Landowner or manager | Agree in writing |
| Farm or rural land | Landowner | Agree in writing |
Truck access and routes
Plan the route from the unit base to each set and from main roads to the base. Large trucks need clearance under bridges and trees, and some rural roads have width or weight limits. A recce with the transport captain or lead driver catches problems a map will miss, such as a tight bend or a gate too narrow for a truck.
Sometimes the answer is a shuttle: park big vehicles at a larger base further away and run smaller vans or minibuses to set. It adds time but avoids blocked lanes and angry neighbours.
Timings and residents
Arrive early, before residents need their parking and before the school run. Leave cleanly, without engines or generators running late into the night. Inform residents in advance, usually with a letter or leaflet giving dates, times and a production contact, which councils often require as part of the permission.
Good conduct matters. Councils and landowners remember productions that leave mess or block driveways, and that can affect future permissions in the area.
On the day
Station marshals or production assistants at the unit base entrance to guide vehicles into position in the planned order, so trucks that leave first are not boxed in. Keep a site plan showing each vehicle's place. Have copies of the permissions and suspensions on hand in case a traffic warden or resident asks.
At wrap, check the base is left clean, no fuel or oil has spilled, and kerbs and verges are undamaged. Photograph the site before and after.
Generators, power and noise
Most unit bases run on generators unless mains power is available on site. Silent-running or super-silenced sets reduce disturbance, but they still need careful placement away from homes and from the sound recordist's set. Exhausts should point away from trucks where people work, and sets should stand on drip trays with fuel delivered by bowser or tanker.
Ask whether the venue or landowner can offer a mains supply. Even a partial connection can cut generator running time, noise and fuel cost, and some councils encourage it in residential areas.
Common unit base mistakes
The most frequent mistakes are underestimating space, forgetting about access for the largest truck, and parking vehicles in the wrong order so the first one needed in the morning is boxed in. Others include missing a notice deadline for a suspension, or relying on a verbal agreement with a landowner who is not on site on the day.
A simple scaled plan, a written permission and a recce with the transport team solve most of these before they happen. Share the plan with every driver the night before, with the arrival order and a contact at the gate, so nobody is circling the block at 6am looking for the entrance.
Questions people also ask
Do I need permission to park film vehicles on a public road?
Usually yes. Councils manage on-street parking and normally require production vehicles to use parking suspensions or permits arranged through the council or its filming office. Notice periods and fees vary by area, so contact the relevant council early in pre-production.
How far should a unit base be from set?
Ideally within easy walking distance, so cast and crew can move quickly between trucks and set. Where that is not possible because of access or space, a base further away with minibus shuttles to set is common. The right balance depends on the location and the size of the unit.
What is a honeywagon?
A honeywagon is a production vehicle containing toilets and often small dressing rooms, parked at the unit base for cast and crew. It is a standard part of larger unit bases and needs suitable access, level ground and servicing during long shoots.
Written and checked by the Film Production Transport team. Read our editorial policy.
More guides
How Much Does Film Production Transport Cost in the UK?
Film production transport in the UK is usually charged per vehicle per day with a driver. A panel van costs £220–£350 a day, a 3.5-tonne Luton tail…
Unit Drivers: Licences, Hours and Tachograph Rules for Shoots
A standard car licence covers vans up to 3.5 tonnes. Trucks of 3.5–7.5 tonnes need C1 entitlement, and larger trucks need a full category C licence.…
ATA Carnets: Taking Film Equipment Abroad from the UK
An ATA Carnet is an international customs document that lets professional equipment, such as camera, lighting and grip kit, be temporarily exported…
How to Choose a Film Production Transport Company
Choose a production transport company that supplies drivers experienced on film sets, the right vehicle sizes for your kit, and drivers with the…
Get a free film production transport quote
Tell us what you need and we'll come back with a clear price.
Request a quote