Guide · Producers · 3 min read · Updated 17 November 2026
Unit Drivers: Licences, Hours and Tachograph Rules for Shoots
Short answer
A standard car licence covers vans up to 3.5 tonnes. Trucks of 3.5–7.5 tonnes need C1 entitlement, and larger trucks need a full category C licence. Professional drivers usually also need a Driver CPC. Goods vehicles over 3.5 tonnes fall under drivers' hours and tachograph rules, which limit daily driving and require breaks, so long shoot days on bigger trucks often need a relief driver.
Why this matters to a production
Production days are long and unpredictable. A unit driver may start at 5am collecting kit and still be on the clock after a midnight wrap. For small vans that is mainly a fatigue and safety issue. For larger goods vehicles, it is also a legal one, because drivers' hours and tachograph rules set hard limits on driving and rest.
Producers and production managers who understand these rules can schedule realistically, budget for relief drivers where needed and avoid a truck being stuck on location because its driver has run out of hours.
Which licence for which vehicle
A full car licence, category B, allows driving vehicles up to 3.5 tonnes maximum authorised mass, which covers most panel vans and Lutons. Vehicles between 3.5 and 7.5 tonnes need category C1. Drivers who passed their car test before 1 January 1997 generally hold C1 already, but younger drivers need to take a separate test. Anything heavier needs a full category C licence.
Minibuses are separate. Driving a minibus for hire or reward normally requires category D1 without the restriction that applies to older grandfather entitlement, and the vehicle must usually be run under a PSV operator's licence.
| Vehicle | Licence category | Hours rules |
|---|---|---|
| Panel van or Luton up to 3.5 tonnes | B | Domestic goods rules may apply |
| Truck 3.5–7.5 tonnes | C1 | Drivers' hours and tachograph |
| Truck over 7.5 tonnes | C | Drivers' hours and tachograph |
| 16-seat minibus for hire | D1 for hire or reward | Passenger vehicle hours rules |
Driver CPC
Most professional drivers of C1, C, D1 and D vehicles also need a Driver Certificate of Professional Competence, shown by a driver qualification card. It requires periodic training to stay valid. There are some exemptions, for example where driving is not the main part of a person's job and the vehicle carries materials or equipment they use in their work, but these are narrow and should be checked carefully.
When you hire a vehicle with a driver, the provider should confirm the driver's licence categories and CPC status. If crew are driving production trucks themselves, the production company should check these details before they set off.
Drivers' hours and tachographs
Goods vehicles over 3.5 tonnes used in this kind of work are generally subject to the assimilated drivers' hours rules, recorded on a tachograph. In outline, they limit daily driving to nine hours, which can be extended to ten twice a week, require a 45-minute break after four and a half hours of driving, and set daily and weekly rest periods.
Time spent waiting on set is not driving, but it still affects rest. A driver who sits on location all day without a proper rest period may not have enough driving time or daily rest left to bring the truck home after a late wrap. Planning for this is the transport manager's job.
- Maximum daily driving of nine hours, extendable to ten twice a week
- A 45-minute break after four and a half hours of driving
- Regular daily rest, normally 11 hours, reducible in limited cases
- Weekly driving limits and weekly rest periods
- Tachograph records kept for every journey
Planning long shoot days
Look at the full day, from the first collection to the last return. If a 7.5-tonne grip truck leaves the rental house at 5am and the shoot is two hours away, the driver has used two hours of driving before call. A 12-hour shoot and a late wrap may leave too little rest before the next day's call.
Common solutions include a second driver who brings the truck home, an overnight stay near location, or moving the kit to a smaller vehicle under 3.5 tonnes where possible. Each option has a cost, but all are cheaper than a stranded truck or a missed call time.
Vans and fatigue
Vans under 3.5 tonnes avoid tachographs, but fatigue is still a serious risk. Drivers who start early, work all day lifting kit and then drive home late are more likely to have an accident. Responsible providers manage van drivers' hours even where the strict rules do not apply, and productions should do the same for crew who drive themselves.
If someone is driving after a very long day, consider a taxi or crew minibus home and collecting the vehicle the next morning instead.
Checks to make before the shoot
Before the first day, confirm with your transport provider which vehicles are over 3.5 tonnes, which drivers hold which categories, and how hours will be managed on the longest days in the schedule. Ask to see a simple plan for any day that looks tight, showing driving time, breaks and rest.
If crew are driving hired trucks themselves, check their licences through the DVLA's licence checking service with their consent, and brief them on breaks and rest. A short conversation before the shoot prevents a much harder one on location at midnight. Keep a record of the checks you made, because if something goes wrong the production will be asked what it did to manage the risk.
Questions people also ask
Can I drive a 7.5-tonne truck on a car licence?
Only if you passed your car test before 1 January 1997, in which case you generally have C1 entitlement already. Drivers who passed after that date need to pass a separate C1 test. Professional use usually also requires a Driver CPC.
Do production vans need a tachograph?
Vans up to 3.5 tonnes do not normally need a tachograph. Goods vehicles over 3.5 tonnes generally do, along with following the drivers' hours rules on driving time, breaks and rest. That is why many productions use 3.5-tonne Lutons where the kit fits.
What licence do I need to drive a crew minibus?
Driving a minibus with nine to 16 passenger seats for hire or reward normally needs a full D1 licence. Older grandfather D1 entitlement on pre-1997 licences usually carries a restriction that excludes hire or reward. The minibus itself generally needs to be run under a PSV operator's licence.
Written and checked by the Film Production Transport team. Read our editorial policy.
More guides
How Much Does Film Production Transport Cost in the UK?
Film production transport in the UK is usually charged per vehicle per day with a driver. A panel van costs £220–£350 a day, a 3.5-tonne Luton tail…
Planning a Unit Base and Location Parking for a Shoot
Plan a unit base by finding a flat, accessible site close to the location with room for trucks to turn, then agree its use with the landowner or the…
ATA Carnets: Taking Film Equipment Abroad from the UK
An ATA Carnet is an international customs document that lets professional equipment, such as camera, lighting and grip kit, be temporarily exported…
How to Choose a Film Production Transport Company
Choose a production transport company that supplies drivers experienced on film sets, the right vehicle sizes for your kit, and drivers with the…
Get a free film production transport quote
Tell us what you need and we'll come back with a clear price.
Request a quote